ROVER TAB 5 Ultra
The TAB 5 ULTRA meter is a professional, complete and accurate meter for DVB-T/T2/T2 Lite/S/S2/C signals, analogue television, FM radio signals, GSM.
The meter has the ability to decode transmissions in HEVC/H.265 (optional), thanks to which you can measure signal parameters and get a preview of DVB-T2/HEVC test transmissions. From mid-2022, this type of transmission will be a common standard in Poland, so it is worth being ready for it today.
Another optional functionality is the ability to measure optical signals, thanks to which it is possible to measure satellite signals from commonly used optical converters manufactured by Global Invacom, as well as measure optical power or attenuation. The optical signal can be received by an internal receiver and converted into an RF signal, thanks to which it is possible to check the content of the DVB transmission.
Other additional options include:
AC3/AC3E/DD+/AAC audio decoding
2.4 and 5GHz WiFi analyzer
RF Reflectometer
TAB 5 ULTRA has a high-resolution 5” LCD touch screen, mechanical buttons and a functional navigation knob. The meter comes with a waterproof case. The meter menu is available in Polish.
TAB 5 ULTRA meter has individual channel plans: 25 (199 channels per plan), programmable TV, SAT (or mixed TV/SAT) via computer or local keyboard Logs: TV, SAT or TV/SAT combined with stop & go function. SAT channel plan: over 2000 transponders for satellites from around the world.
SPECIAL FUNCTIONS:
» Patented ROVER AUTODISCOVERY system - automatically identifies analog, digital COFDM, QAM signals in measurement and spectrum mode
» Automatic identification of signals with digital modulation - SAT, TV, CATV
» Automatic assistant: Signal quality analysis, Recording of searched channels
» BARSCAN function - simultaneous graph for 10-100 channels
» Buzzer & Noise Margin - real-time graph showing micro interferences in digital signals
» Coaxial cable reflectometer - option
» Optical input - option
» Wi-Fi analyzer - option
» HEVC (H265) decoder - preview and analysis of signals encoded in this system
» DiSEqC, SCR, dCSS and motor support - SAT FINDER and SAT EXPERT
» Individual channel plans: up to 25 (max 199 channels/plan), managed by PC
» Logs: For TERR and SAT with stop/start option
» SAT channel plan - over 2000 programmed transponders from all over the world
» Free program for meter management and software updates.
SPECIFICATION: MEASUREMENTS, SPECTRUM AND STREAM ANALYSIS:
» Frequency range: TV, CATV & Radio: 30-1000MHz; SAT: 700-2700MHz
» Measurement resolution: TV & CATV 25KHz, SAT: 5MHz
» Measurement range (power): TV: 35..115dBµV, SAT: 5..105dBµV
» Digital measurement: Digital signal power, MER (36 to 40dB depending on modulation), BER, PER, LDPC, BCH, Noise Margin, MER vs CARRIER
» Measurement resolution: 0.1dB
» Power measurement accuracy: 1dB typ.
» Constellation: for TV/CATV and SAT
» Spectrum: Fast spectrum, Max Hold and spectrum storage for real-time comparisons
» Network identification: Net-id, NID, TSID, LCN, SAT Orbit Position
» Echo, Pre-Echo, Micro-Echo: real-time visualization
» Quality: Digital audio quality test (PASS/MARGINAL/FAIL)
» Video preview: MPEG2.4 SD and HD, HEVC (option) + Program list, Audio and Video PIDs, LCN, Bitrate
OPTICAL MEASUREMENTS:
» Measurement connector - SC/APC
» Automatic attenuation calculation
» Optical wavelengths: 1310, 1490, 1550nm
» Measurement range (power): -25dBm to +6dBm
» Measurement resolution: 0.1dB
» Measurement accuracy +/-0.5dB
» Optical signal conversion to RF
INPUT/OUTPUT CONNECTORS:
» RF input: 75 Ohm (interchangeable F socket)
» USB 2.0: type B (PC communication)
» Speaker - listening to the audio track of the selected stream
» Video output - composite (cinch)
MAIN PARAMETERS:
» 5-inch TFT display, touch: 16:9 high resolution and brightness
» Power supply: Built-in LiPo battery - 4h working time + test function
» DC power supply at RF input: 5/12/18/24V DC. DiSEqC, SCR and dCSS command support
» Front panel: alphanumeric keyboard
» Energy saving: display timer, brightness control
» Management via PC using SMART software
» Weight - only 1.4kg (including battery)
» Dimensions (H x W x D) - 13 x 25.5 x 4 cm
» Housing: Aluminum and steel + cover
OPTIONAL EQUIPMENT:
» RF reflectometer
» Optical measurement
» HEVC H265 decoding
» Wi-Fi analyzer
» Dolby Audio AC3 DD+ decoding
Product features:
- 5-inch display
- DVB-S/S2/C/T/T2
- dCSS, dSCR measurement
- HEVC decoding option
- Capacitive battery for over 4 hours of operation
- New compact design
- Signal measurement option optical
- Reflectometer function for coaxial cables
- WiFi measurement option